News & Events

The correct way to add water to the battery of electric forklift

Update time : 2021-08-26 15:28:39

Ordinary batteries used in electric forklifts（Battery powered forklifts） should be replenished with water once a month. Other types of batteries should be supplemented with distilled water on a regular basis according to water consumption. For batteries that are not in use temporarily, it can be delayed for several months before refilling.

After replenishing the battery, the battery should be recharged in an appropriate amount. If some batteries have a rapid liquid level drop and frequent water replenishment, check whether the limit voltage of the regulator on the car is adjusted too high. Too high will cause overcharging, high water consumption, and fast evaporation. This situation can be solved by adjusting the limit voltage. If some batteries drop quickly, check whether there is a short circuit. In addition, it also depends on whether there are cracks in the battery tank and whether the electrolyte leaks. It is necessary to judge the actual situation before handling.

The battery of the electric pallet truck is operating normally, and only water can be added, and electrolyte must not be added. If the battery of an electric forklift is dumped and the electrolyte flows out and causes loss, the electrolyte can be replenished. Replenishing the electrolyte of the electric forklift should be supplemented according to the original electrolyte density. Sometimes the electric forklift cannot be started. Many people think that it is caused by insufficient power storage. They often add electrolyte to the battery. The result is counterproductive and greatly shortens the service life of the battery.

Previous : Forklifts types which are suitable to use in warehouse

Next : Why does the forklift battery need to add distilled water？

What to Check When Your New Forklift Arrives

Sep .18.2026

A new forklift should be inspected before it enters daily service. A structured handover check gives the receiving team a chance to confirm that the truck arrived in the expected condition, that its basic functions work properly, and that the required documents are available.

500-Hour Forklift Maintenance: A Practical Service Checklist for Ongoing Reliability

Aug .31.2026

250-Hour Forklift Maintenance: What to Check After the Second Service Interval

Aug .24.2026

A proper 250-hour service is not just an oil change. It is a structured inspection of the forklift's operating condition, lubrication points, mast and chain system, transmission components, brake system, tire condition, and key fasteners. For electric forklifts, it is also the right time to inspect and clean the battery, electrolyte, connectors, and electrical controls.

First 50-Hour Forklift Maintenance: What Should Be Checked After Initial Use

Aug .20.2026

Learn why the first 50-hour forklift maintenance is important and what should be checked, adjusted, lubricated, or replaced after the initial running-in period.

HITOP FORKLIFT HITOP FORKLIFT

Leave a message

Language

Language

The correct way to add water to the battery of electric forklift