News & Events

The development trend of intelligent unmanned forklifts

Author : HITOP

Update time : 2021-04-09 16:32:03

In the intelligent industry, intelligent logistics and warehousing have developed rapidly with the popularization of artificial intelligence technology, and the market trend of intelligent forklifts is constantly changing. As a major part of intelligent unmanned forklifts, Agv forklifts occupy an important market position in the market.

In recent years, affected by the analysis of external environmental factors such as factory intelligence and the increase in human resource costs, the traditional logistics management work relying on human transportation will be transformed into automation and intelligence. The most important operation mode is mainly through internal The control system runs, and the scheduling system helps logistics and warehousing improve efficiency and makes management more flexible. Among them, the intelligent unmanned forklift is one of them.

The logistics system can play a very important role for the intelligent unmanned forklift. It is mainly used for raw material processing equipment and used in various industries. The trend of our huge truck market is increasing year by year at a double-digit rate.

Through the continuous rise of labor costs, the upgrading of manufacturing enterprises' transformation, the acceleration of technology and other factors, and the promotion of future development, forklift AGV has become an unstoppable trend, and is in line with the intelligent industry, intelligent logistics and the rapid growth of warehousing in the future. The show is more intelligent.

Although my country accounted for 36% of the global forklift market in 2019 (30% in Europe and 15.3% in North America), electrification, less than 50% of the forklifts in the Asia-Pacific region are electric forklifts, and more than 85% in Europe. Given that the largest share of lithium-ion battery production is in the Asia-Pacific region, and these reports are shocking, the report predicts that electrification in the Asia-Pacific region will rise significantly, and its share will reach 61% by 2028.

The AGV solution requires on-site investigation, collects all the information and customer needs needed for the project, and assists ours pre-sales technical engineers to make the project technical solution:
1. Discuss the preliminary requirements (you do not need to go to the site to understand the preliminary requirements and budget. See if there are available products or whether it is worth doing. Projects with small quantities and low budgets are appropriately abandoned) (Currently, 50% of the projects are required in the first step Filtered out)
2. If the project is more reliable, understand the detailed requirements.
3. Issue a preliminary plan and quotation, and send it to the customer (80% of the projects, stop at this stage)
4. The two parties repeatedly communicated and modified the confirmation plan (work flow, AGV selection, quantity calculation, route planning, location planning, which software needs to be connected, etc.)
5. Confirm the technical agreement, implementation goals and acceptance criteria for subsequent operations.

AGV Environmental Requirements
    Ambient temperature: 0℃~＋55℃.
    Altitude: No more than 1500m.
    Relative humidity: Monthly average value is no more than 90%, and maximum relative humidity is no more than 95%, no condensation from air.
Power source: Power source for battery charger of AGV is of AC three-phase five-wire system, with line voltage of 220V±10% AC, 50Hz.
    Road gradient: < 3%.
    Operating noise of AGV: ≤70dBA.
    Ground conditions: Unevenness per square meter of the ground shall be less than 5mm. Bearing capacity shall reach 1t/m2, and allowable specific pressure is no less than 1.0Mpa. The ground shall be capable of discharging static electricity for AGV.
    Crossbeam pallet rack: Verticality ≤1‰; level difference per layer ≤5mm; racks at both sides of aisle shall be aligned with each other, with deviation ≤10mm (suggestion: measured and adjusted by professionals)
    Requirements on wireless network: network standard: WLAN802.11; signal channel: channel 1.6.11 under 2.4GHz; signal strength ﹥-70Bm; at least 2 available access points on running route of vehicle (no disruption of communication when one of the APs is dropped)
    Additional position-limit devices shall be installed at locations of all pallets involved that are to be handled manually, so as to fix position of pallets, with deviation within ±10mm.

Previous : Safe operation process of forklift

Next : Measures to prevent electric forklift circuit wiring harness from burning

Forklift Red Zone Warning Light

Mar .11.2024

Red zone warning lamp is an exceptionally effective safety system that should be used on all forklifts. The device highly increases the comfort and safety of every working environment and its use can help reduce the number of accidents – including all incidents involving pedestrians.

HITOP CPD20 CPD16 electric forklifts are exported to the Netherlands and Cayman Islands Respectively

Mar .04.2024

HITOP CPD20 CPD16 electric forklifts are exported to the Netherlands and Cayman Islands Respectively.

The Basics of Forklift Tire Maintenance

Mar .01.2024

The tire is the only connection point between the forklift and the road. It not only bears the entire weight of the forklift and the weight of the cargo, but also responds to driving actions such as steering, acceleration and braking, and absorbs the impact of the road on the vehicle. Especially in winter when the ground is slippery, tires are crucial to driving safety and cannot be ignored!

Four 3-ton HITOP diesel forklifts with Mechanical transmission are ready for Indonesia

Oct .26.2023

Four 3-ton HITOP diesel forklifts with Mechanical transmission are ready for Indonesia.

HITOP FORKLIFT HITOP FORKLIFT

Leave a message